Fairmont Hydraulic Impact Wrench and Drill

• Super Spool selector control for use on Open and Closed Center hydraulic systems.
• Use to tighten or loosen nuts, install lag screws or as a drill.
• Variable torque control can be adjusted from 80 to 280 ft./lb.
• Internal flow control prevents overspeeding, allows flows of up to 12 gpm.
• Reversible.
  
  
  • Capacity: 1/2" drive, 7/16" hex
  • Weight: 7.5 lbs.
  • Length: 11"
  • Width: 3"
  • Height: 10.75"
  • Operating Pressure: 1,000 - 2,000 psi
  • Torque: 80 - 280 ft. lb. @ 5 gpm
  • Impacts Per Min: 2,200 rpm @ 5 gpm"

---

Fairmont Hydraulic Impact Wrench
3/4" Square Drive & 5/8" Hex

• Added power and torque for heavy-duty jobs.
• Twin hammer design.
• Can be used on either Open Center or Closed Center systems.
• Adjustable torque control.
• Auxiliary Handle
• Needle bearing, rugged gear motor design for long life.
  
  
  • Capacity: 3/4" square or 5/8" quick-change chuck
  • Weight: 12.3 lbs.
  • Length: 9.69"
  • Width: 3.75"
  • Height: 11.69"
  • Operating Pressure: 1,000 - 2,000 psi
  • Torque: 1,060 ft. lb.
  • Impacts Per Min: 2,700 rpm @ 6 gpm"

---

Fairmont Hydraulic Variable Torque Impact Wrench and Drill
1/2" Square Drive and 7/16" Hex

• Super Spool for use on Open and Closed Center hydraulic systems.
• Internal control prevents overspeeding, allows up to 12 gpm
• Reversible operation.
• High torque for drilling salt-cured and creosoted poles.
• Heat-insulated handle, ergonomically positioned for comfort.
• Twin hammer impact mechanism for high performance and reliability.
• Variable torque control can be adjusted from 80 to 400 ft./lb.
  
  
  • Weight: 7.1 lbs.
  • Length: 8.2"
  • Width: 4.2"
  • Height: 10.6"
  • Operating Pressure: 1,000 - 2,000 psi
  • Torque: Adj. 80 to 400 ft. lb.