4808 N. Renellie Dr.  ·  Tampa, FL 33614
Phone: 813-877-1921



IMPORTANT

The original 500, 700, & 900 Tap & Turn teeth have been discontinued by the factory. They have been replaced with the 500, 700, & 900 Red & Green Threaded Tooth with Nut. These new teeth fit seamlessly into the original Lo-Pro pockets.




700 Series - Red/Green Tooth with Nut

Tap & Turn Tooth and PocketTap & Turn Tooth and Pocket
700 Series Tooth (Stocked Item)
  • This tooth is used on machines ranging from 19-35 horsepower
  • The diameter of the tooth is 3/4" or the size of a nickel

GT700TH-R : 700 Series RED Deep Dish Threaded Tooth for LoPro Pocket
  • The Red Teeth (Reds) are a deeper dished tooth designed around soft woods such as pine. They offer a tremendous sheering action and a very smooth cut. They carry an edge very well and using them can be like adding horsepower to your machine. They were designed around lower, horsepower machines however, they are currently running very successfully on machines up to 120 h.p.
GT700TH-G : 700 Series GREEN Standard Dish Threaded Tooth for LoPro Pocket
  • The Green Teeth (Greens) excel in rocky soil. They take a shock very well. The dish, or concave, is similar to the angle found on standard " shank teeth. These were designed for larger horsepower machines, however, they are currently running on machines with as little as 25 h.p.

LoPro Pockets
  • For use as an angle or straight pocket on either side of the cutting wheel.
  • For use with the NEW 700 Tooth with Nut only.
700 LoPro Pockets
GT700LP-A - Angled LoPro Pocket
GT700LP-R - Reverse Angled LoPro Pocket
GT700LP-S - Straight LoPro Pocket
Stocked Item


Lo-Pro Bolts
  • Has a smooth shank to minimize wheel wear
  • Slot at the end for easy removal in the case of a broken bolt.
  • Has 1/2" allen drive
  • For use with the LoPro pockets only.
SmartBolt
GTSB-134 - 1 3/4" Long for 3/8" Wheel
GTSB-200 - 2" Long for 1/2" Wheel
GTSB-214 - 2 1/4" Long for 3/4" Wheel
GTSB-212 - 2 1/2" Long for 1" Wheel
GTSB-300 - 3" Long for 1.5" Wheel
Stocked Item



900 Series - Red/Green Tooth with Nut

900 Tap & Turn Teeth
900 Series Tooth (Stocked Item)
  • This tooth is used on machines ranging from 36-65 horsepower
  • The diameter of the tooth is 7/8" or the size of a quarter

GT900TH-R : 900 Series RED Deep Dish Threaded Tooth for LoPro Pocket
  • The Red Teeth (Reds) are a deeper dished tooth designed around soft woods such as pine. They offer a tremendous sheering action and a very smooth cut. They carry an edge very well and using them can be like adding horsepower to your machine.
GT900TH-G : 900 Series RED Standard Dish Threaded Tooth for LoPro Pocket
  • The Green Teeth (Greens) excel in rocky soil. They take a shock very well. The dish, or concave, is similar to the angle found on standard " shank teeth.

LoPro Pockets
  • For use as an angle or straight pocket on either side of the cutting wheel.
  • For use with NEW 900 tooth with nut only
900 LoPro Pockets
GT900LP-A - Angled LoPro Pocket
GT900LP-R - Reverse Angled LoPro Pocket
GT900LP-S - Straight LoPro Pocket
Stocked Item


Lo-Pro Bolts
  • Has a smooth shank to minimize wheel wear
  • Slot at the end for easy removal in the case of a broken bolt.
  • Has 1/2" allen drive
  • For use with the LoPro pockets only.
SmartBolt
GTSB-134 - 1 3/4" Long for 3/8" Wheel
GTSB-200 - 2" Long for 1/2" Wheel
GTSB-214 - 2 1/4" Long for 3/4" Wheel
GTSB-212 - 2 1/2" Long for 1" Wheel
GTSB-300 - 3" Long for 1.5" Wheel
Stocked Item



1100 Series

1100 Series Tooth and Pocket
1100 Series Tooth (Stocked Item)
  • This tooth is used on machines ranging with 75+ horsepower
  • The diameter of the tooth is 1 1/8" or slightly larger than the size of a quarter
1100 Series Green Teeth
GT1100-R - RED Greenteeth Deep Dish Tooth
  • The Red Teeth (Reds) are a deeper dished tooth designed around soft woods such as pine. They offer a tremendous sheering action and a very smooth cut. They carry an edge very well and using them can be like adding horsepower to your machine. They were designed around lower horsepower machines however, they are currently running very successfully on machines up to 120 h.p.
GT1100-G - GREEN Greenteeth Standard Dish Tooth
  • The Green Teeth (Greens) excel in rocky soil. They take a shock very well. The dish, or concave, is similar to the angle found on standard " shank teeth. These were designed for larger horsepower machines however, they are currently running on machines with as little as 25 h.p.

1100 Series Pockets
GT1100CB - Angled C-Bored Pocket
GT1100TH - Angled Threaded Pocket
GT1100CBS - Straight C-Bored Pocket
GT1100THS - Stright Threaded Pocket
Stocked Item

POCKET BOLTS FOR 1100 SERIES GREENTEETH

ALLEN BOLTS

Allen Bolt
GTCS-134 : 1 3/4" Long
Stocked Item

GTCS-158 : 1 5/8" Long
Stocked Item

GTCS-178 : 1 7/8" Long
Stocked Item

GTCS-212 : 2 1/2" Long
Stocked Item

GTCS-300 : 3" Long
Stocked Item
GREEN BOLTS
Can be installed and removed with a screw driver
Green Bolt
GTGB-134 : 1 3/4" Long
Stocked Item

GTGB-2 : 2" Long
Stocked Item

GTGB-214 : 2 1/4" Long
Stocked Item

GTGB-212 : 2 1/2" Long
Stocked Item

GTGB-234 : 2 3/4" Long
Stocked Item

GTGB-3 : 3" Long
Stocked Item

Tree-Line Sales & Service, Inc. © 2008

| Home | About Us | Forestry Bucket Trucks | Utility Bucket Trucks | Digger Derricks | New Chippers | Used Chippers | New Stump Cutters | Used Stump Cutters | Ropes | Misc. Bags | Training Books | Replacement Climbing Pads | Climbing Spikes | Lanyards & Slings | Climbing Belts | Body Belts | Saws, Blades & Scabbards | Bucket & Boom Accessories | Carabiners & Snaps | Replacement Spike Accessories | Pruners & Adapters | Climbing Accessories | Misc. Accessories | Service | Standard Stump Cutter Teeth | Rayco Superteeth | Greenteeth Stump Cutter Teeth | Rayco Sprockets | Rayco Bearings | Bits & Pieces, Misc. Parts | ANSI Safety Products | DOT Safety Products | Misc. Items | Long Reach Hydraulic Saws | Hydraulic Pistol Grip Chain Saws | Hydraulic Impact Wrenches | Service & Repairs | Questions / Comments | Mailing List | Links |
Site Map